BS-708 G-Mouse USB GPS Dongle Navigation Module G7020-KT Chip External GPS Antenna with 4M Flash USB GPS Receiver for Raspberry Pi Linux Windows 7 8 10

Feature:Chipset: G7020-KTReceiving Format: GPS, QZSS and SBASFrequency: GPS L1, SBAS L1Channels: 56 Searching ChannelTracking: -162dBmReacquisition: -160dBmCold start: -148dBmPosition Horizontal: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky)Velocity: 0.1m/sec 95% (SA off)Timing: 1us synchronized to GPS timeCold Start: 29SWarm Start: 25SHot Start: 1SSupport Rate: 4800bps to 921600bps,Default 9600bpsData Level: Default USB levelData Protocol: USB, TTL or RS232, Default NMEA-0183Concurrent GNSS: 1Hz-10Hz,Default 1HzAltitude: 50,000m MaxVelocity: 515m/s MaxAcceleration: Less than 4gVCC: DC Voltage 3.6V-5.5V, Typical: 5.0VCurrent: Capture 65mA@5.0VDimension: ΦO=56mm*18mmConnector: USB 2.0 interfaceCable Length: 2.0mOperating temp: -40 °C ~ +85°CStorage Temp: -40°C ~ +105°C Package Includes: 1 X USB GPS Module

• BS-708 USB GPS Module support windows and linux system, not for android and IOS system
• BS-708's chip is G7020-KT. The Receiving Format: GPS,QZSS and SBAS, and have 56 Searching Channel; Data Level: Default USB level; Data Protocol: USB, TTL or RS232, Default NMEA-0183
• You need to install the driver to use BS-708 USB GPS Module on Windows system, but it is plug and play on Linux system
• This usb GPS receiver has a cable length of 2 meters, BS-708 USB GPS Module has 4M flash to save the configuration. So you don't need to reset the data when you use it next time
• Documentation you can find at the bottom of the details page - Product guides and documents: (User Manual (PDF), which contains details on how to use and links to the drivers.