Touch Switch UT19T1 Stepless Dimming Switch DC 6V to 24V Blue LED Suitable for 19mm 3/4" Mounting Hole
Product details
| Management number | 247167267 | Release Date | 2026/08/16 | List Price | US$4.75 | Model Number | 247167267 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
What You Get: 1 * Touch Switch 1 * Instruction What's the Touch Switch: Touch switch, just touch it! The touch switch is rated for 7A MAX /DC 6-24V. What's the Touch Switch Used for: Most often the Stepless Dimming switch is used for lights (Such as critical lights, chassis lamp, dome light) About Stepless Dimming type: 1.The light is off when connecting to electricity. Click it (time <550ms) once to initiate it with the light on. Click it again to let it be off. Continue to cycle. 2.The initial brightness is 100% of the maximum brightness. 3.Touch and hold it (time > 550ms) to initiate stepless dimming control. The brightness increases when touching and holding, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at maximum level. The brightness decreases when touching and holding again, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at minimum level. Continue to cycle. 4.Click and Holding Touch can be used anytime. There is no interference between these two functions. What's Note:*The touch switch can't be used on a pump.It will be burnt out easily.*If you meet the static electricity problem, you can let the switch housing be grounded. *The touch switch doesn't work with wet or damp fingers. *The touch switch cannot be used in AC circuit. Don't exceed the rating volts! Specifications: Head diameter: 7/8" ( 22mm ) Mounting hole size: 3/4" ( 19mm ) Depth inc contacts: 1.1" ( 28mm ) Switch Type: Stepless Dimming Input Voltage: DC 6V-24V Output Current: 7A MAX LED voltage: DC 6V-24V LED color: Blue (always ON) Enclosure material: Stainless Steel Protection level: IK10 Operating Temperature: -20℃ ～ +55℃
- Touch switch, just touch it!
- Stepless Dimming Type: You can Click or Holding Touch the switch to control your lights
- Blue LED ring always light ON, make you quickly find the switch at night or in the dark
- The wires replace the terminal pins, make installing very easy
- Dimming Switch, normally be used to control the lights. Don't exceed the rating amps and volts, you can run it on your other projects.
| ASIN | B07D2DPH6D |
|---|---|
| Color | Stepless Dimming |
| Model | UT19 |
| Wattage | 168 watts |
| Terminal | Pins |
| Brand Name | Ulincos |
| Unit Count | 1 Count |
| Item Weight | 0.27 g |
| Part Number | UT19T1B |
| Switch Type | Touch Switch |
| Circuit Type | 1-way |
| Contact Type | Normally Open |
| Control Type | Touch |
| Manufacturer | Ulincos |
| Actuator Type | Push Button |
| Material Type | Stainless Steel |
| Mounting Type | Panel Mount |
| Connector Type | Wire |
| Control Method | Touch |
| Current Rating | 7 A |
| Operation Mode | manual |
| Controller Type | Ring |
| Item Dimensions | 7.09 x 0.87 x 0.87 inches |
| Number of Items | 1 |
| Contact Material | Copper, Brass |
| Operating Voltage | 24 volts |
| Specification Met | Ik10, Ipx4 |
| Compatible Devices | Lights (Such as critical lights, chassis lamp, dome light) |
| Number of Positions | 1 |
| Connectivity Protocol | X-10 |
| Upper Temperature Rating | 55 °C |
| International Protection Rating | IPX4 |
Bestseller ranking
Rattan Headboards
Customers who viewed this product also viewed
Dimmer Switches
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form